backtrace(3) - Linux manual page (2024)

backtrace(3) Library Functions Manual backtrace(3)

NAME top

 backtrace, backtrace_symbols, backtrace_symbols_fd - support for application self-debugging

LIBRARY top

 Standard C library (libc, -lc)

SYNOPSIS top

 #include <execinfo.h> int backtrace(void *buffer[.size], int size); char **backtrace_symbols(void *const buffer[.size], int size); void backtrace_symbols_fd(void *const buffer[.size], int size, int fd);

DESCRIPTION top

 backtrace() returns a backtrace for the calling program, in the array pointed to by buffer. A backtrace is the series of currently active function calls for the program. Each item in the array pointed to by buffer is of type void *, and is the return address from the corresponding stack frame. The size argument specifies the maximum number of addresses that can be stored in buffer. If the backtrace is larger than size, then the addresses corresponding to the size most recent function calls are returned; to obtain the complete backtrace, make sure that buffer and size are large enough. Given the set of addresses returned by backtrace() in buffer, backtrace_symbols() translates the addresses into an array of strings that describe the addresses symbolically. The size argument specifies the number of addresses in buffer. The symbolic representation of each address consists of the function name (if this can be determined), a hexadecimal offset into the function, and the actual return address (in hexadecimal). The address of the array of string pointers is returned as the function result of backtrace_symbols(). This array is malloc(3)ed by backtrace_symbols(), and must be freed by the caller. (The strings pointed to by the array of pointers need not and should not be freed.) backtrace_symbols_fd() takes the same buffer and size arguments as backtrace_symbols(), but instead of returning an array of strings to the caller, it writes the strings, one per line, to the file descriptor fd. backtrace_symbols_fd() does not call malloc(3), and so can be employed in situations where the latter function might fail, but see NOTES.

RETURN VALUE top

 backtrace() returns the number of addresses returned in buffer, which is not greater than size. If the return value is less than size, then the full backtrace was stored; if it is equal to size, then it may have been truncated, in which case the addresses of the oldest stack frames are not returned. On success, backtrace_symbols() returns a pointer to the array malloc(3)ed by the call; on error, NULL is returned.

ATTRIBUTES top

 For an explanation of the terms used in this section, see attributes(7). ┌─────────────────────────────────────┬───────────────┬─────────┐ │ Interface │ Attribute │ Value │ ├─────────────────────────────────────┼───────────────┼─────────┤ │ backtrace(), backtrace_symbols(), │ Thread safety │ MT-Safe │ │ backtrace_symbols_fd() │ │ │ └─────────────────────────────────────┴───────────────┴─────────┘

STANDARDS top

 GNU.

HISTORY top

 glibc 2.1.

NOTES top

 These functions make some assumptions about how a function's return address is stored on the stack. Note the following: • Omission of the frame pointers (as implied by any of gcc(1)'s nonzero optimization levels) may cause these assumptions to be violated. • Inlined functions do not have stack frames. • Tail-call optimization causes one stack frame to replace another. • backtrace() and backtrace_symbols_fd() don't call malloc() explicitly, but they are part of libgcc, which gets loaded dynamically when first used. Dynamic loading usually triggers a call to malloc(3). If you need certain calls to these two functions to not allocate memory (in signal handlers, for example), you need to make sure libgcc is loaded beforehand. The symbol names may be unavailable without the use of special linker options. For systems using the GNU linker, it is necessary to use the -rdynamic linker option. Note that names of "static" functions are not exposed, and won't be available in the backtrace.

EXAMPLES top

 The program below demonstrates the use of backtrace() and backtrace_symbols(). The following shell session shows what we might see when running the program: $ cc -rdynamic prog.c -o prog $ ./prog 3 backtrace() returned 8 addresses ./prog(myfunc3+0x5c) [0x80487f0] ./prog [0x8048871] ./prog(myfunc+0x21) [0x8048894] ./prog(myfunc+0x1a) [0x804888d] ./prog(myfunc+0x1a) [0x804888d] ./prog(main+0x65) [0x80488fb] /lib/libc.so.6(__libc_start_main+0xdc) [0xb7e38f9c] ./prog [0x8048711] Program source #include <execinfo.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #define BT_BUF_SIZE 100 void myfunc3(void) { int nptrs; void *buffer[BT_BUF_SIZE]; char **strings; nptrs = backtrace(buffer, BT_BUF_SIZE); printf("backtrace() returned %d addresses\n", nptrs); /* The call backtrace_symbols_fd(buffer, nptrs, STDOUT_FILENO) would produce similar output to the following: */ strings = backtrace_symbols(buffer, nptrs); if (strings == NULL) { perror("backtrace_symbols"); exit(EXIT_FAILURE); } for (size_t j = 0; j < nptrs; j++) printf("%s\n", strings[j]); free(strings); } static void /* "static" means don't export the symbol... */ myfunc2(void) { myfunc3(); } void myfunc(int ncalls) { if (ncalls > 1) myfunc(ncalls - 1); else myfunc2(); } int main(int argc, char *argv[]) { if (argc != 2) { fprintf(stderr, "%s num-calls\n", argv[0]); exit(EXIT_FAILURE); } myfunc(atoi(argv[1])); exit(EXIT_SUCCESS); }

SEE ALSO top

 addr2line(1), gcc(1), gdb(1), ld(1), dlopen(3), malloc(3)Linux man-pages (unreleased) (date) backtrace(3)

Pages that refer to this page: mallopt(3)

Copyright and license for this manual page